HOT ! Wall dehumidifier (recessed) 405 DF (5l / h) embedding MONO

To preserve the humidity in your indoor pool, you can count on the effectiveness of the built-in DF dehumidifier.

It has the additional advantage of being practically invisible: installed on the wall between the engine room and the pool area, only the suction and ventilation grids are visible from the pool. Very simple installation :  just place it on the wall and it will take up little space.

This control box allows you to adjust the hygrometry rate and maintain your usual comfort level: 65%. It is also used to adjust the thermostat on models with the air heating option.

• 
  

  Simple installation, through the wall, at height (from 1.2 m to 1.3 m from the ground)

  
  


• 
  

  Optional air heating (with electric complement or hot water coil)

  
  


• 
  

  Modular: standard right and left side access (optional)

  
  

 INSTALLATION:

• 
  

  Installation at a technical site close to the pool site.

  
  


• 
  

  Aluminum insufflation and aspiration grid to be installed in the insulating structure.

  
  


• 
  

  Possibility of a double deflection insufflation grille to direct hot, dry air to the windows.

  
  


• 
  

  Hot water battery mounted inside the equipment (optional).

  
  


• 
  

  Electric heating complement with built-in electrical resistances (optional).

  
  


• 
  

  Suction filter.

  
  

INCLUDES:

• 1x 5l/h dehumidifier


• 1xHydrocontrol (humidity and temperature controller)


• 1x Piece of lead with frame + grids


• 2x Wall fixing squares


• 4x Anti-Vibration Blocks


• 1x Ø32 half-joint to be glued + 1” PVC joint + gasket


• 2xWith condenser option: Ø50 half-joint connections to be glued + gaskets


• 2x With hot water coil option: sockets to be soldered Ø20/22 + gaskets